2020 Holiday Gift Guide

We're taking out the guesswork. Give Heavy Duty.

Accessories

HOLE DOZER™ with Carbide Teeth

( Hole-Dozer-with-Carbide-Teeth )

Milwaukee® HOLE DOZER™ with Carbide Teeth hole saws provide 50X Life in Extreme Multi-Material cutting applications when compared to bi-metal hole saws while cutting in high RPM. Built utilizing a tough carbide grade combined with a durable 4TPI design, yielding the best tooth durability and longest life in Stainless Steel, Abrasive Materials and Fastener Embedded Wood. Cutting depth is 1.62", allowing clearance to handle cuts in all materials. With a Thermoset Coating to reduce friction and drag during cutting, users benefit from faster cutting and increased cordless efficiency. Slug removal is made easy with the ALL ACCESS Slots which enhance user productivity by providing best access and leverage to remove material slugs. HOLE DOZER™ with Carbide Teeth are made in USA.

SHOCKWAVE 75PC IMPACT DRILL & DRIVE SET

( 48-32-4030 )

Our SHOCKWAVE™ 75 Piece Impact Drill & Drive Set feature bits engineered to be the Most Durable, Best Fitting driver bits on the market. Each impact drill and driver bit features Wear Guard Tip™ that delivers increased wear resistance which protects the fit over the life of the bit. The driver bits in this SHOCKWAVE™ bit set have optimized Shockzones for each tip type and length of the driver bit to absorb peak torque and prevent breaking. The impact driver bits are made from Custom Alloy76™ steel, heat treated based on tip type to extend the life of driver bits, providing you with up to 50X life vs. competitive impact driver bits. MILWAUKEE® SHOCKWAVE™ driver bits are built to deliver extreme durability for the most demanding jobsite applications.

The AX with Carbide Teeth for Pruning Clean Wood SAWZALL Blades

( The-AX-with-Carbide-Teeth-for-Pruning-Clean-Wood-SAWZALL-Blades )

Our AX™ with Carbide Teeth SAWZALL® Blades for Pruning & Clean Wood are designed for the fastest above and below ground cutting applications. These SAWZALL® pruning blades offer up to 50X more life vs. carbon steel reciprocating saw blades available today. The MILWAUKEE® AX™ blades for pruning and clean wood cutting offer a 3 TPI design, which allows for the fastest cutting in clean wood, and a low profile blade geometry designed for root removals. Our optimized carbide teeth withstand abrasives like rock, sand, and dirt as users remove roots for trenches or stumps for tree removals. Milwaukee carbide teeth products allow you to cut longer, cut more, and cut faster than other carbide-teeth blades on the market.

THE WRECKER™ with Carbide Teeth SAWZALL® Blades

( THE-WRECKER-with-Carbide-Teeth-SAWZALL-Blades )

Our WRECKER™ with Carbide Teeth SAWZALL® Blades are the most versatile carbide blade on the market. These multi-material SAWZALL® blades offer up to 50X more life vs. bi-metal reciprocating saw blades available today. The MILWAUKEE® WRECKER™ Carbide SAWZALL® blades offers a 6 TPI design, which allows for cutting into a wide variety of materials from clean wood to cast iron for quick demolition and remodeling work. The Fang Tip™ Design allows for faster plunge cuts into wood materials. Milwaukee Carbide Teeth products allow you to cut longer, cut more, and cut faster than other carbide-teeth blades on the market.

OPEN-LOK™ 1-3/8" HCS WOOD BLADES 3PK

( 49-25-1103 )

Our Universal Fit OPEN-LOK™ Oscillating Multi-Tool HCS Wood Blades are made from premium high carbon steel with an aggressive tooth design and longer length, ideal for plunge cuts. These features provide you with fast cutting performance in wood, PVC, drywall, and other soft materials. These MILWAUKEE® Multi-Tool Blades are designed and made in the USA with global materials. Available in 1-3/8" and 2-1/2" widths in 1, 3, or 10 packs and 3-1/2” in 1 pack.

Universal Fit Open-Lok™ Oscillating Multi-Tool Kits/Variety packs

( Universal-Fit-Open-Lok-Oscillating-Multi-Tool-Kits )

MX4™ 4-Cutter SDS PLUS Rotary Hammer Drill Bits

( SDS-PLUS-4-Cutter-Drill-Bits )

Our MX4™ 4-Cutter SDS PLUS Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. We designed our MX4™ 4-Cutter bits with sharp centering tips for exact spot drilling in concrete and metal decking. 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications. Choose from single bits, bulk packs, or drill bit kits in a variety of sizes.

SDS-PLUS SLEDGE™ Bull Point & Flat Chisel 2 Pack

( 48-62-6080 )

Our 2 Pack SDS-PLUS SLEDGE™ Bull Point & Flat Chisels stay sharper longer. Reinforced edges deliver maximum durability and reduced wear over the life of the chisel. These SDS-Plus chisels are engineered to maintain sharper edges for increased productivity. They feature longer tip lengths vs. standard chisels for maximum life. The SLEDGE™ Bull Point Chisel is ideal for starting holes, and both chisels are designed for general chipping and breaking concrete. No re-sharpening or re-hardening is necessary, reducing user's downtime. The high grade forged steel delivers maximum durability. The bull point and flat chisels are designed for use with SDS-Plus rotary hammers and offer longer life in concrete demolition over standard MILWAUKEE® chisels.

Hand Tools and Storage

3/8” Drive 28pc Ratchet & Socket Set with PACKOUT™ Low-Profile Compact Organizer - SAE

( 48-22-9481 )

Our Ratchet and Socket Set features sockets that have FOUR FLAT™ Sides that deter rolling and are wrench compatible for maximum productivity. The 90-tooth ratchet tool that provides 4° of arc swing and a slim profile for work in tighter spaces. We’ve stamped the sizes into each socket for easy-to-read visibility. You can keep our 28-piece 3/8 in. Drive Ratchet and Socket Set organized in the included PACKOUT™ Compact Low-Profile Organizer equipped with a clear top for easy identification of parts. This PACKOUT™ Organizer is IP65 rated and built from impact-resistant materials for durability on the jobsite with a reinforced hinge and heavy-duty latches. The Compact Low-Profile Compact Organizer is part of the MILWAUKEE® PACKOUT™ Modular Storage System, allowing you to custom build storage systems to easily transport and organize your tools and accessories. This Combo Kit includes a 28 Piece 3/8 in. SAE Drive Ratchet and Socket Set and a PACKOUT™ Compact Low-Profile Organizer.

3/8” Drive 32pc Ratchet & Socket Set with PACKOUT Low-Profile Compact Organizer - Metric

( 48-22-9482 )

Our Ratchet and Socket Set features sockets that have FOUR FLAT™ Sides that deter rolling and are wrench compatible for maximum productivity. The 90-tooth ratchet tool that provides 4° of arc swing and a slim profile for work in tighter spaces. We’ve stamped the sizes into each socket for easy-to-read visibility. You can keep our 32-piece 3/8 in. Drive Ratchet and Socket Set organized in the included PACKOUT™ Compact Low-Profile Organizer equipped with a clear top for easy identification of parts at a glance. This PACKOUT™ Organizer is IP65 rated and built from impact-resistant materials for durability on and off the jobsite with a reinforced hinge and heavy-duty latches. The Compact Low-Profile Organizer is part of the MILWAUKEE® PACKOUT™ Modular Storage System, allowing you to custom build storage systems to easily transport and organize your tools and accessories. This Combo Kit includes a 32 Piece 3/8 in. Metric Drive Ratchet and Socket Set and a PACKOUT™ Compact Low-Profile Organizer.

8pc Screwdriver Kit w/ Square

( 48-22-2718 )

Featuring hardened tips & forged shanks the Milwaukee® 10 Piece Screwdriver Set provides professional grade solutions and durability to the user. Bit types are marked on the cap of each tool for quick identification and increased efficiency.The comfortable tri-lobe handle allows users to comfortably apply more leverage.

Comfort Grip 6in1 Pliers

( 48-22-3079 )

Our 6-in-1 Comfort Grip Combination Pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head, allowing you to smooth out rough edges of metal pipe. A curved blade design enables you to achieve clean cuts through larger wire sizes. The combo pliers allow you to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation, and they won’t open while stored in your pouch or backpack. The 6-in-1 pliers deliver maximum productivity and are perfect for the toughest job sites. We stand behind our product and offer a MILWAUKEE® Limited Lifetime Warranty with all combination pliers.

Demolition Gloves

( 48-22-8732 )

Milwaukee® Demolition Work Gloves are designed to provide Ultimate Durability and All Day Comfort.  Featuring palms and finger tips reinforced with Armortex®, Milwaukee Demolition Work Gloves will provide best in class durability and grip for the most demanding tasks.  The integrated Smartswipe™ Knuckle is designed to allow the use of smart phones and touch screens, without removing gloves or wiping dirty finger tips across the screen.  In addition, a breathable lining and built-in terry cloth sweat wipe ensure the gloves remain comfortable all day.

FASTBACK™ Folding Utility Knife Set

( 48-22-1503 )

Our FASTBACK™ Folding Utility Knife Set includes the FASTBACK™ Folding Utility Knife with Blade Storage and the FASTBACK™ Compact Folding Utility Knife. Both MILWAUKEE® knives feature a press and flip mechanism for easy, one-handed opening. The utility knives allow users to make quick, tool-free blade changes for maximum efficiency with a metal extension over the button prevents accidental blade removal.Both press and flip open utility knives have a durable wire belt clip to reduce pocket tearing. The FASTBACK™ Folding Utility Knife with Blade Storage has an integrated gut hook and wire stripper for increase versatility. The metal body on the FASTBACK™ Folding Utility Knife w/ Blade Storage provides durability and the onboard blade storage allows users to store 5 extra blades. The small utility knife is compact for easy storage.

PACKOUT™ 16QT Compact Cooler

( 48-22-8460 )

Our PACKOUT™ Modular Storage System is the industry's most durable and versatile storage system. The PACKOUT™ 16QT Compact Cooler holds ice for over 30 hours, and we've constructed it with impact-resistant polymers for ultimate jobsite durability. This cooler is IP65 rated to withstand harsh environments and jobsite debris. Our 16-quart cooler with an integrated bottle opener and interior storage tray offers you maximum versatility on and off the jobsite with a no-sweat exterior. The MILWAUKEE® PACKOUT™ Modular Storage System allows you to customize a storage system that easily transports and organizes your tools and accessories.

Penlight

( 2105 )

Our Penlight delivers 100 lumens of output for Brighter, Clearer, Easier Inspections. The innovative protective rubber bite zone at the end of the light allows you to safely direct light while performing two-handed tasks. Our LED pen light is IP67 rated, making it waterproof, dustproof, and sealed to withstand the toughest job site conditions. The penlight's lens and 6000 series aircraft aluminum body are impact and corrosion resistant. The penlight’s metal clip easily attaches to your chest or pant pockets for quick access and everyday use. Our TRUEVIEW™ High Definition output illuminates more of your work area with brighter natural light optimized for high color accuracy. Our MILWAUKEE® Penlight is covered by a limited lifetime warranty.

Safety Glasses - Yellow Anti-Scratch Lenses

( 48-73-2120 )

Our Performance Safety Glasses are designed with high impact, fog-free lenses. This protective eyewear passes a high-velocity impact test, providing you with lenses with military-grade impact protection. The protective glasses have fog-free lenses, so they stay clear in the toughest conditions and are coated to reduce scratching. These MILWAUKEE® Performance Fog-Free Safety Glasses are available with yellow or gray lenses. The yellow-tinted lenses make environments appear brighter, making them ideal for working in low light, and the gray are best for transitioning between indoor and outdoor work.

Clear Performance Safety Glasses with Gasket

( 48-73-2040 )

Our Performance Safety Glasses with Gaskets provide Advanced Protection with Ultimate Performance. The safety glasses feature a removeable gasket that protects your eyes against debris. For added protection, the lenses are high-velocity impact tested providing you with military grade impact protection. The protective eyewear features fog-free lenses so the lenses will stay clear and unobstructed on any jobsite. Durable anti-scratch lenses protect your eyes while withstanding the demands of a job site. Clear and glare-reducing polarized options are available so your eyes stay safe whether working indoors or outdoors.

25ft STUD™ Tape Measure

( 48-22-9725 )

Our 25ft STUD™ Tape Measure is the industry's most durable tape measure, equipped with innovative EXO360™ Blade Technology. EXO360™ protects your tape's blade from ripping and wearing, delivering the longest-lasting blade on the market. The tape delivers 17' of reach* allowing you to take long measurements on your own and reach further on the jobsite. Cutting-edge measuring tape blade technology, combined with a fully-reinforced impact-resistant frame makes STUD™ Tape Measures the most durable retractable tape measure for all your jobsite needs. STUD™ measuring tapes also features double-sided printing for easy reading as well as a finger stop to control blade retraction.

25ft Wide Blade Tape Measure

( 48-22-0225 )

Our 25ft Wide Blade Tape Measure has the longest reach and straightest standout in the industry. The 17’ of reach* allows you to take long measurements on your own and reach further on the jobsite. The blade design delivers the straightest standout*, reducing arc in the blade for efficient and accurate mesasuring. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional anti-tear coating on the first 6” of the blade, reducing tape tear. Built to withstand the jobsite, the measuring tapes are constructed with a 5-point reinforced frame for impact resistance.

M12™

M12 FUEL™ Oscillating Multi-Tool

( 2526-20 )

Our M12 FUEL™ Oscillating Multi-Tool generates the fastest 12V cut speed, lowest full-tool vibration, and delivers tool-free blade change for faster accessory changes and no misplaced tools. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12V competitor. The vibration isolating tool design minimizes vibration making your cuts more comfortable with less fatigue. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M12™ REDLITHIUM™ XC4.0 battery (not included) delivers most work of any 12V battery on the market. The MILWAUKEE® M12 FUEL™ Oscillating Multi-Tool has a 12-Setting Dial allowing you to adjust the speed to the application, and an integrated LED light for maximum visibility.

M12 FUEL™ 1/4" Right Angle Die Grinder

( 2485-20 )

Our M12 FUEL™ 1/4" Right Angle Die Grinder is the first cordless right angle die grinder that delivers the performance and size professional service mechanics demand. The die grinder delivers 20% more power than pneumatic competition and features our POWERSTATE™ Brushless Motor Technology. The cordless die grinder provides you with up to .3 HP performance, best-in-class size to help fit in tight places, and offers you greater mobility and access. The M12™ die grinder features a 4-Mode speed control and responsive variable-speed trigger giving you unmatched control.

M12 FUEL™ 2-Tool Combo Kit: 1/2" Hammer Drill and 1/4" Hex Impact Driver

( 2598-22 )

The 2598-22 M12 FUEL 2-Tool Combo Kit is the Most Capable and Most Compact 12-Volt Hammer Drill Driver and Impact Driver Combo Kit on the market. Included is the M12 FUEL Hammer Drill Driver (2504-20), the Most Capable, Lightest Weight and Most Compact 12-Volt Hammer Drill Driver in the market. At only 6.6 and 2.8 lbs. of weight it is the best Hammer Drill Driver to use in compact spaces. It delivers the power to do a wide variety of applications at 1700 RPMs and 350 in./lbs. of torque. Also included, the M12 FUEL Hex Impact (2553-20), the Fastest Driving Speed, Most Compact with 4- Mode Drive Control Impact Driver in the market. At 3,300 RPM the impact drives screws over 20% faster than competitors. At 5.1 in. L it allows for unmatched access in tight spaces. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

M12 FUEL™ 3/8" Extended Reach Ratchet (Tool Only)

( 2560-20 )

Our M12 FUEL™ 3/8" Extended Reach Ratchet is the latest addition to our best-in-class lineup of battery powered ratchets. These MILWAUKEE® M12 FUEL ratchets provide industry leading torque output with a slim head profile and an extended neck that give you the longest reach in tight spaces. The long neck electric ratchet features an Investment Cast Steel Yoke housing and a POWERSTATE™ Brushless Motor that deliver superior durability you expect from Milwaukee. The long reach electric ratchets are the ideal addition to any tool chest; allowing you to get to stubborn, hard to reach fasteners without the concern of knuckle busting, The 3/8" cordless ratchet provides the performance of a pneumatic ratchet with up to 55 ft-lbs max torque, the same torque output as our M12 FUEL™ Ratchets.

M12 FUEL™ 3/8" Right Angle Impact Wrench w/ Friction Ring (Bare tool)

( 2564-20 )

Our M12 FUEL™ 3/8" Right Angle Impact Wrench w/ Friction Ring is the industry's most powerful right angle impact wrench. You’ll be able to easily remove stubborn bolts and fasteners with up to 220 ft-lbs. of nut-busting torque without kickback. This cordless right angle impact wrench also gives you maximum access with ultimate control in hard to reach applications. Our durable cordless impact wrench easily fits into tighter spaces than traditional pistol-grip impact wrenches with a profile head of only 2.2”.This allows you to be more productive by decreasing your need for socket extensions often used with pistol-grip impact tools. The 4-Mode Drive Control delivers unmatched control in various fastening and bolt removal applications. Modes 1-3 provide RPM and IPM adjustments for maximum precision, and Mode 4 is equipped with Auto Shut-off in forward and Bolt Removal Mode in reverse. Our Auto Shut-off Mode will prevent over-tightening of bolts by applying no more than 15 ft-lbs. of torque. Bolt Removal Mode provides more control by drastically slowing down RPMs once the bolt is loosened. The REDLINK PLUS™ Intelligence ensures you achieve maximum performance and protection against overloads, over-heating, and over-discharge. This cordless ⅜” impact wrench is powered by MILWAUKEE® M12™ REDLITHIUM™ Battery Packs (not included), which are compatible with all M12™ tools, delivering more work per charge and more work over the life of the pack.

M12 FUEL™ 3/8" Stubby Impact Wrench

( 2554-20 )

Our M12 FUEL™ 3/8" Stubby Impact Wrench is the industry's most compact cordless impact wrench. At only 4.8" in length, it allows you to work in tighter spaces delivering the power to complete many of the most demanding tasks and increasing your productivity. The compact impact delivers high torque with our POWERSTATE™ brushless motor. The impact wrench delivers an industry leading 250 ft.-lbs. of breakaway torque. This allows you to remove even the most stubborn bolts and fasteners. Our cordless impact wrench features built-in REDLINK™ tool technology to help you get the job done. 4-Mode Drive Control provides you with unmatched control in various fastening applications Modes 1-3 gives you precision and control for any application. An Auto-Shut-Off Mode in the 4th setting prevents over-fastening of bolts while doing reassembly work. Our MILWAUKEE® M12 FUEL 3/8" Stubby Impact Wrench is part of the M12™ battery line, featuring over 100+ powerful and compact tools.

M12 FUEL™ 5/8” SDS Plus Rotary Hammer (Tool Only)

( 2416-20 )

The Milwaukee® M12 FUEL™ 5/8” SDS Plus Rotary Hammer Kit provides up to 75% faster drilling, up to 70% less vibration, and up to 2X more runtime and the largest SDS Plus bit capacity in its class. Milwaukee has combined its exclusive POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack, and REDLINK PLUS™ Intelligence to deliver a 12V rotary hammer that rivals compact 18V tools on the market today. At only 10” long and 3.9 lbs, this tool provides performance and runtime that is comparable to a much larger tool, at a fraction of the size and weight. The electropneumatic design allows for drilling of up to 5/8” holes in concrete and masonry. For maximum versatility, regardless of application or orientation, the tool also features 2-mode operation, rotary hammer and rotation only. The kit includes 2 M12™ REDLITHIUM™ XC 4.0 Extended-Capacity Battery Packs, an M12™ Lithium-ion Battery Charger, and plastic carrying case.

M12 FUEL™ 5-3/8" Circular Saw (Tool Only)

( 2530-20 )

With a cut capacity of 1-5/8" for cutting 2x dimensional lumber, the M12 FUEL™ 5-3/8" circular saw, delivers up to 170 cuts per charge and up to 2X the motor life of competitive products.With the ability to cut a wide range of common jobsite materials, the M12™ circular saw was designed to deliver the power, run-time and durability required by professionals. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries.The M12 FUEL™ 5-3/8" circular saw features a built in LED light for great cutline visibility and all aluminum guards and shoe for increased durability on the jobsite.

M12 FUEL™ Installation Drill/Driver Kit

( 2505-22 )

Our M12 FUEL™ Installation Drill/Driver Kit features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in-lbs of max torque. Four dedicated heads, including a 3/8” Chuck, Offset Driver, ¼” Hex, and Right Angle, can attach in 16 different positions. This provides you with a 4-in-1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access when needed. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing your productivity. These unique features combine with the tool’s compact size and weight allowing you to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ Brushless Motor, delivering you with 1600 RPMS and 300 in./lbs of torque. This provides you with the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ Intelligence, protecting your tool from overloading or overheating. The compact cordless drill/driver is powered by our M12™ REDLITHIUM™ battery packs, delivering you with more run-time per charge and more work over the life of the pack. In addition to the 12-volt tool and four attachments, a compartmentalized contractor bag is included to hold each individual head. This kit also includes two M12™ REDLITHIUM™ CP2.0 battery packs (48-11-2420) and an M12™ Charger (48-59-2401).

M12 FUEL™ HACKZALL® Recip Saw (Tool Only)

( 2520-20 )

The M12 FUEL™ HACKZALL® is the fastest cutting and most powerful saw in its class, delivering over 4X more run-time, up to 70% faster cutting, and up to 6X longer tool life than competitive saws. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. Its’ light weight design is optimal for overhead cutting applications. The POWERSTATE™ Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. REDLINK PLUS™ Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M12™ REDLITHIUM™ XC4.0 Battery Pack (not included) provides more work per charge and more work over the life of the pack than competitive batteries. The dual gear counter balance mechanism significantly reduces vibration, providing faster starts in metal and reduced user fatigue.

M12™ Heated AXIS™ Jacket

( 203-20 )

Our M12™ Heated AXIS™ jackets are designed to protect you from the cold and weather elements on the job site. Powered by M12™ REDLITHIUM™ Battery Technology, these heated work jackets use carbon fiber heating elements to create and distribute heat to the chest, back and shoulders. A one-touch LED controller heats up the battery heated jacket to three heat settings, creating a comfortable heat for any environment or weather. This MILWAUKEE® heated jacket has a new Quick-Heat function that allows you to feel heat three times faster than our previous jackets and market competitors. Like all of our other products, our jackets are built strong to last long with new hybrid AXIS™ Ripstop Polyester providing a lightweight, compressible design that can be used as an inner layer or mid-layer jacket and protects you from wind and water resistance to survive the elements. The heated coats are available in black and olive green options with sizes ranging from small to 3XL.

M12™ Heated TOUGHSHELL™ Jacket

( 202-20 )

Our heated TOUGHSHELL™ jacket is powered by our powerful M12™ REDLITHIUM™ batteries. Each heated jacket uses carbon fiber heating elements to create and distribute heat to your chest, back and front hand pockets. A one-touch LED controller heats up the battery heated jacket to three heat settings, creating a comfortable heat for any environment or weather. This MILWAUKEE® heated jacket has a new Quick-Heat function that allows you to feel heat three times faster than our previous jackets and market competitors. Like all of our other products, our jackets are built strong to last long with TOUGHSHELL™ stretch polyester delivering five times longer jacket life than our previous Softshell heated jackets. The durable material also provides wind and water resistance to survive the elements whether you are on the worksite or enjoying the outdoors. The heated coats are available in black, red and gray options with sizes ranging from small to 3XL.

M12™ 600 MCM Cable Cutter (Tool Only)

( 2472-20 )

Simplify cable cutting with the one cordless tool that fits comfortably in crowded panels and generates 5,000 pounds of force. With an open jaw, breakthrough powered ratcheting mechanism and superior blade geometry, the 600 MCM Cable Cutter fits into tight spaces and cuts effortlessly through large-diameter cable, leaving a clean, installation-ready cut. The compact size and scissor-style jaws enable cutting in crowded panels without looping, ratcheting or long arms. Ideal for electricians, datacomm, utility or service contractors or demolition crews, this cable cutter with 2-speed gear case delivers the power needed to cut large-diameter cable, and then switches into high speed to slice quickly through a variety of smaller and more common wire types. Powered by the revolutionary 12-volt REDLITHIUMTM Battery (sold separately), this new cable cutter can deliver up to 150 cuts of 500 MCM copper per charge. A built-in LED light illuminates the line of cut.

M12™ Compact Inflator

( 2475-20 )

FASTEST CORDLESS TIRE INFLATOR. The Milwaukee® M12™ Compact Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. With the capability to complete demanding applications like car, LT truck, and compact equipment tires, the M12™ Compact Inflator gives users ultimate power and efficiency. Rated to deliver over 120PSI, The high efficiency motor and pump top-off car tires in under 1 minute. The TrueFill™ Auto shut-off technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI. Additionally, the unit includes a large easy to read back-lit LCD, anti-vibration feet, and 26” inch hose with an all brass Schrader chuck.

M12™ M-SPECTOR FLEX™ 3' FT Inspection Camera Cable w/ PIVOTVIEW™ Kit

( 2317-21 )

The M12™ M-SPECTOR FLEX™ Inspection Camera Cable W/ PIVOTVIEW™ Kit is the only contractor inspection camera that gives users full control positioning the camera head with its exclusive PIVOTVIEW™ cable. With the turn of a dial, it’s 270⁰ camera head motion means never again dealing with the frustrations of bending, feeding and positioning standard camera cables just to look in different directions. The cable attaches in four different positions allowing users to inspect in all directions and optimize the dial position. Leveraging state-of-the-art LED technology, users get 15X greater LED brightness for seeing further and clearer in large, dark spaces. The 12.5mm (.49”) diameter and shortened camera head length gives users easier and greater access to tight spaces than 17mm cameras. A 3.5” wireless LCD display console allows users to comfortably view images in any position. Capture best-in-class images or video on an SD card for easy documentation of warranty claims or service work for customers. The M12™ M-SPECTOR FLEX™ Inspection Camera Cable W/ PIVOTVIEW™ Kit is perfect for remodel inspections, facility maintenance, machinery and production lines, and residential or commercial trades where documenting inspections is essential.

M12™ Radio + Charger

( 2951-20 )

Our M12™ Radio + Charger delivers you unmatched sound for its size, allowing you to turn it up on and off the jobsite. This Bluetooth speaker with radio has a sleek integrated design, giving you various hanging options with a self-centering keyhole and hollow handle for pass-through hanging. These features provide enhanced portability for the freedom to hang it up wherever you go. This jobsite speaker radio has an IP54 rating, increasing durability with water and debris resistance. Pair with our M12™ CP 2.0 Battery for 10 hours of runtime or use the included 12V DC port to keep your M12™ Batteries charged up throughout the day. Get our M12™ Radio + Charger to CHARGE UP. HANG UP. TURN UP.

M12™ REDLITHIUM™ XC6.0 Battery

( 48-11-2460 )

Our M12™ REDLITHIUM™ XC6.0 Battery delivers up to 3X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries. The lithium-ion battery pack features superior pack construction, electronics, and performance giving you more work per charge and more work over pack life than any battery on the market. The rechargeable battery also offers you 5.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0°F/-18°C. Its compact, lightweight design allows you to work in tight work spaces and reduces fatigue. Built-in REDLINK™ Intelligence protects the battery from overloads, preventing you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize your battery's life. Switch to our REDLITHIUM™ XC6.0 Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M12™ cordless tools.

M12™ ROCKET™ Dual Power Tower Light

( 2132-20 )

Our M12™ ROCKET™ Dual Power Tower Light is more portable and offers an all-day operation. The compact tower light is the lightest in its class with a 45% smaller footprint than our M18™ ROCKET™ Tower Lights. This allows you to easily carry and set it up in the most confined spaces. When not in use, the portable tower light collapses down to just 31" in length with three side handles allowing you to easily transport and store it. The LED tower light extends 5'8” to provide 1,400 Lumens of TRUEVIEW™ High Definition Output on high mode and 700 Lumens on low mode. The LED light tower head rotates 210° and pivots 270° allowing you to cast light in any direction. Our M12™ REDLITHIUM™ XC6.0 battery pack provides up to 10 hours of light on a single charge. The dual-powered light can also be plugged into an extension cord for all-day operation. After deployment, the portable tower light is supported by impact-resistant, reinforced legs that form a compact base with a low center of gravity to help survive any job site. The protective guard secures the head during transport and storage ensuring your tower light is always ready to use. The LEDs never need to be replaced and are backed by a limited lifetime warranty. MILWAUKEE® ROCKET™ Tower Lights are designed to deploy in seconds and are built to adapt to any job site environment. The LED tower lights supply both task and area lighting and provide light overhead to reduce shadows in the workspace.

M18™

M18™ TOP-OFF™ 175W POWER SUPPLY

( 2846-20 )

Our M18™ TOP-OFF™ 175W Power Supply delivers faster simultaneous power to personal devices and small electronics. Attach any M18™ battery to provide continuous power or recharge devices with (1) AC 120V outlet, (1) USB-C PD port, and (1) USB-A port. You can quickly charge up to three devices at the same time, without the barriers of speed throttling. By connecting any USB-C cable to the USB-C PD port (45W), this battery inverter is capable of recharging devices, from a fully depleted state to 80% capacity, up to 75% faster than conventional wall chargers (5W). The MILWAUKEE® compact portable power supply has an attached metal rafter hook that can be extended to hang it from carts, lumber, or other jobsite materials when worksurface space is limited. You can instantly set up a mobile workstation or keep electronics securely within eyeshot, rather than making frequent trips to a wall outlet.

M18 FUEL™ 2 Gallon Compact Quiet Compressor

( 2840-20 )

Our M18 FUEL™ 2 Gallon Compact Quiet Compressor is designed for the professional carpenter and remodeler. This quiet air compressor is only 68dB(A), making it the quietest cordless compressor on the market and quieter than most corded options. We’ve designed this 2-gallon air compressor to be high performing while reducing the noise professionals deal with on jobsites. Its low profile and stackable design allow our portable air compressor to be easily stored and transported on, around, and back off the jobsite. It has run-time professionals need to stay productive, giving you up to 1,600 18ga brad nails per charge. It is compatible with all MILWAUKEE® M18™ REDLITHIUM™ batteries making it easy to swap packs and keep running to finish your job.

M18 FUEL™ 2-Tool Combo Kit: Hammer Drill/Impact

( 2997-22 )

The M18 FUEL ½” Drill Driver is the Industry's Most Powerful Drill delivering Up to 60% More Power, is Up To 1.5” Shorter and is Up To 2X Faster Under Heavy Load. The POWERSTATE™ Brushless motor delivers 1,200 in-lbs of torque and 2,000 RPMs providing fast drilling through demanding applications. At 6.9” in length this is the most compact drill in its class giving better access into tight spaces and reducing fatigue. The REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating or over-discharge. The REDLITHIUM XC5.0™ Battery Pack delivers more work per charger and more work over the life of the pack than competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.

M18 FUEL 3-in-1 Backpack Vacuum

( 0885-20 )

Whether taking on spot, area, or final cleanups, the Milwaukee M18™ FUEL™ 3-in-1 Backpack Vacuum brings unmatched cordless performance, portability, and versatility to the jobsite. The POWERSTATE™ Brushless Motor and cyclonic design deliver up to 2X more suction power than traditional jobsite vacs, allowing users to efficiently tackle common jobsite debris like drywall dust, concrete dust, and wood/metal shavings. A removable harness, integrated canister hook and handle allow users to wear, hang, and carry the product for ultimate adaptability. Standard accessories include a flexible hose, telescoping extension wand, floor tool, crevice tool, HEPA filter, and dust extraction adapter. At only 76 dB(A), the vacuum is up to 3X quieter than traditional vacs, providing comfortable operation on any jobsite, including occupied spaces.

M18 FUEL™ 12" Dual Bevel Sliding Compound Miter Saw - Kit

( 2739-21HD )

Our M18 FUEL™ 12" Dual Bevel Sliding Compound Miter Saw with ONE-KEY™ Kit generates the power of 15amp corded saws and is designed for the professional carpenter, remodeler, and general contractor. The miter saw is up to 15% lighter than competitor saws and delivers up to 330 cuts per charge. It has the same capacity as corded a 12-inch miter saw, providing you with the ability to perform all of your critical applications while increasing your portability, efficiency, and productivity on the jobsite. The cordless miter saw features our POWERSTATE™ Brushless Motor, REDLINK PLUS™ Tool Intelligence, and is powered by our M18™ REDLITHIUM™ batteries. The saw has a Shadow Cut Line LED light, an adjustable stainless steel detent plate, cam locking miter system and easy carry side handles, making it a leading miter saw solution. In addition to the saw, this kit includes one M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery, an M18™ & M12™ Rapid Charger, handles and clamp.

M18 FUEL™ 1-3/4” SDS Max Rotary Hammer w/ ONE KEY™ (Tool Only)

( 2718-20 )

Our M18 FUEL™ 1-3/4” SDS Max Rotary Hammer w/ ONE KEY™ generates the power of a 15A Corded Rotary Hammer. It has a 1-3/4" capacity, 8.1 ft-lbs of impact energy, 380 RPM, and 2,900 BPM. Our cordless rotary hammer is designed for the professional user, allowing ultimate power, control, safety, and productivity. The POWERSTATE™ Brushless Motor gives you 8.1 ft-lbs of impact energy that meets and rivals that of corded competition. REDLINK PLUS™ intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over discharge. Our M18 REDLITHIUM™ High Output HD12.0 battery delivers unmatched run-time in all applications when used with the rotary hammer drill. It allows the SDS Max hammer drill to chip 1/2 ton of material per charge so you can work harder for longer. Our full feature hammer delivers maximum control and enhanced safety with the AUTOSTOP™ E-Clutch. This prevents over-rotation in case the tool gets bound up while you are drilling in rebar or hard aggregate. Competitive tools can rotate up to 360 degrees while our rotary hammer will stop rotating at 45 degrees when the tool gets bound up. This feature is designed to ensure you have more control while on the job. The cordless rotary hammer is compatible with ONE KEY™, wirelessly connecting to your smartphone to track and manage the tool’s performance and location. ONE-KEY™ integrated tool tracking gives you full visibility over how and where your tools are being used across your network of jobs and users. The technology is built into the tool and not the battery, allowing you to track it even if the battery is not charged or connected. The app will track all compatible devices within a 100 ft range of your phone, allowing you to pinpoint missing tools quicker and increase accountability of your crew. Integrated Tool Security provides the ultimate theft protection with features like tool lock-out, or the ability to hide power tools from nearby device screens allow you to protect your investments. If your tool is lost or stolen, you can render it inoperable by sending a remote command to the tool to shut itself off the next time it comes within range of any ONE-KEY™ app.

M18 FUEL™ 18 Gauge Brad Nailer

( 2746-20 )

Our M18 FUEL™ 18ga Brad Nailer delivers peak productivity at your jobsite, providing you with unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the Brad nailer allows you to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of our POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence delivers you with unmatched fire rate with zero ramp-up time keeping you efficient throughout your day. Additionally, the cordless brad nailer operates using our REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors’ nailers. The 18 gauge nailer is compact in size, and very lightweight, providing you with unmatched access into tight spaces and limiting your fatigue throughout your day. The M18 FUEL™ 18ga Brad nailer delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of cordless.

M18 FUEL™ 7" / 9" Large Angle Grinder (Tool Only)

( 2785-20 )

The M18 FUEL™ 7" / 9" Large Angle Grinder is the world's first 18v LAG. It generates 15A corded power is up to 2 lbs lighter, and has 9" grinding capacity. Providing high performance, advanced ergonomics & legendary durability, this grinder is designed to complete the toughest grinding, surface preparation, and cutting applications with any 7" - 9" accessory. The POWERSTATE™ Brushless Motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT HD12.0 battery delivers unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work.

M18 FUEL™ 9" Cut-Off Saw w/ ONE-KEY™

( 2786-20 )

Our M18 FUEL™ 9" Cut-Off Saw w/ ONE-KEY™ is an extremely versatile solution for cutting a large variety of materials. The cordless cut off saw runs on our MILWAUKEE® M18™ REDLITHIUM™ batteries instead of using gas like most traditional cut off saws. The cut off saw delivers you the Power To Cut Reinforced Concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being Up To 50% Lighter Than Gas demo saws that are in the market today. By utilizing our M18™ REDLITHIUM™ HIGH OUTPUT HD12.0 Battery (not included), the saw also ensures you will experience No Gas Headaches. The concrete cutting saw produces no fumes so you can use it indoors. It also starts up instantly, eliminates your need to mix gas and oil, and there is no gas engine maintenance. The M18 FUEL™ 9" Cut-Off Saw also has ONE-KEY™ integrated so you can wirelessly connect the tool with your smartphone to track and manage the tool.

M18 FUEL™ Blower (Tool Only)

( 2724-20 )

The M18 FUEL™ Blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE™ Brushless Motor and REDLITHIUM™ HIGH OUTPUT™ XC8.0 Battery (sold seperately) deliver 450 CFM and 120 MPH output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL™ Blower is fully compatible with 200+ solutions on the M18™ system.

M18 FUEL™ Deep Cut Band Saw (Tool Only)

( 2729-20 )

The M18 FUEL™ Band Saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE™ Brushless motor and Constant Power Technology™, the M18 FUEL™ Deep Cut Band Saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee Corded Deep Cut Band Saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology™, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM™ XC5.0 Battery Technology provides up to 2.5X more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market. REDLINK PLUS™ Intelligence has the most advanced system of cordless power tool electronics, providing optimized performance, electronic clutch, and overload protection using total system communication between tool, battery and charger. The M18 FUEL™ Deep Cut Band Saw features a tool-free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hang hook for easy storage in-between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user’s hands.

M18 FUEL™ SUPER HAWG™ 1/2" Right Angle Drill

( 2809-20 )

Our M18 FUEL™ SUPER HAWG® 1/2" Right Angle Drill delivers the next generation of ground-breaking performance with the power and speed to replace corded right angle drills. The cordless right angle drill is designed from the ground up to generate corded power, work as fast as the corded competition, and deliver you with up to 100 2-9/16" holes through 6" beams per battery charge on our M18™ REDLITHIUM™ HIGH OUTPUT™ 6.0AH battery (not included). The MILWAUKEE® SUPER HAWG® features our POWERSTATE™ Brushless Motor, optimized REDLINK PLUS™ electronics, and is powered by our REDLITHIUM™ HIGH OUTPUT™ Batteries. The drill's all-metal 1/2" keyed chuck provides you with ultimate durability and long tool life. An all-metal side handle and LED light ensures you have optimal control and visibility while operating your tool. The M18 FUEL™ SUPER HAWG® delivers the performance and run-time to complete single-family home rough-ins or the ability to rough-in multiple multi-family units on a single charge.

M18 FUEL™ SUPER SAWZALL® Reciprocating Saw

( 2722-20 )

The SUPER SAWZALL® Reciprocating Saw generates 15A corded power, faster cuts than 15A corded reciprocating saws and delivers up to 150 cuts in 2x12 SPF per charge. Designed to perform in the toughest applications, the M18 FUEL™ SUPER SAWZALL® combines Milwaukee's legendary performance and durability with the portability of the M18™ platform. The POWERSTATE™ Brushless Motor provides 3,000 SPM and higher speeds under load for corded cutting performance. REDLINK PLUS™ Intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery delivers unmatched run-time in all applications. The 1-1/4" stroke length removes more material with each stroke and On/Off orbital action provides aggressive cuts in wood and smooth cuts in metal. Variable speed trigger and 5-speed dial provide maximum speed control for any application. The QUIK-LOK® blade clamp allows for tool less blade changes and a rafter hook provides a convenient way to store the saw between cuts.

M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack

( 48-11-1812 )

The M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack provides 50% more power and runs 50% cooler vs M18™ REDLITHIUM™ HD battery packs. The massive increase in power elevates the performance of the entire M18™ system and drives the next breakthrough in M18 FUEL™, delivering the power of 15A corded product. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 is the best performing cold weather pack ever made, providing increased power in extreme cold weather conditions (below 0F / -18C). It provides the most work per charge of any professional power tool battery in the industry, driving full corded replacement on the jobsite. The REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery is fully compatible with 150+ M18™ solutions.

M18™ & M12™ Super Charger

( 48-59-1811 )

The MILWAUKEE® M18™ & M12™ Super Charger charges batteries up to 4X faster than standard Milwaukee chargers, massively reducing downtime and maximizing productivity. The charger accepts all M18™ & M12™ batteries, providing an upgrade for both M18™ & M12™ systems. M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 fully charges in only 1 hour. HIGH OUTPUT™ batteries are optimized for use with Super Charger, each built with premium components for superior charging capabilitiy. Featuring REDLINK™ Intelligence, the dual battery charger communicates directly with each battery to monitor cell voltage, temperature and charge status to optimize the performance and extend the life of the pack. The Super Charger identifies the fastest charge rate for each M18™ or M12™ battery pack inserted, adjusting to charge each in the shortest amount of time possible.

M18™ 2-Gallon Wet/Dry Vacuum

( 0880-20 )

The M18™ 2-Gallon Wet/Dry Vacuum provides users with a Powerful and Portable Wet/Dry Clean-up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on-board storage keeps all of the attachments inside the unit for convenient transport and storage. The 0880-20 comes with a flexible hose, crevice tool, utility nozzle, and a certified HEPA filter. With 30+ minutes of run time on a M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Battery Pack, its ideal for extended spot and area clean up.

M18™ Compact Vacuum

( 0882-20 )

The M18™ Compact Vacuum provides users with the most powerful & adaptable handheld cleanup tool. A high performance motor creates best in class suction for cleanup of drywall dust, wood/metal shavings, and common jobsite debris. With a unique handheld design, the M18™ Compact Vacuum can be used in a wide variety of orientations and applications across the jobsite. For added versatility, the 0882-20 comes with (2) extension wands, 4’ flexible hose, crevice tool, floor tool, and removable HEPA filter. A clear view and easy to empty canister provides added convenience. As a part of the M18™ System of tools, it is powered by REDLITHIUM™ battery packs, which deliver up to 25 minutes of run time on a XC5.0 battery pack and 43 minutes of runtime on a HIGH DEMAND™ 9.0 Battery Pack.

M18™ Jobsite Fan

( 0886-20 )

The M18™ Jobsite Fan provides the most powerful airflow, and unmatched run-time in a compact size. The 0886-20 can circulate air over 40 feet, making it ideal for drying or cooling on a variety of jobsites. Powered by the M18™ REDLITHIUM™ battery the Jobsite Fan delivers up to 17 hours of run-time on low* for all day run-time on a single battery charge. This jobsite fan features a 120° adjustable head, 9 stopping positions and 3 speed settings which provide optimal airflow control. The 0886-20 also includes an AC adaptor for extended run-time. *17 hours with a M18 REDLITHIUM XC 5.0 battery (batteries and charger sold separately)

M18™ RADIUS™ Compact Site Light

( 2145-20 )

Our M18™ RADIUS™ Compact Site Light is the Most Versatile Light on Site. It is the world’s first high output cordless site light on the market and provides light in task, area, and overhead applications. The compact LED job site light offers 4,400 lumens of TRUEVIEW™ High Definition Output. Our portable site light provides enough light to illuminate large work areas and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens and IP54 ingress protection allow it to live in the toughest job site conditions. Our high-quality LEDs never need to be replaced and are backed by a limited lifetime warranty. MILWAUKEE® RADIUS™ Site Lights provide maximum coverage for task, area, or overhead applications with their ability to fill an entire workspace with 360 degrees of light.

M18™ ROCKET™ Dual Power Tower Light

( 2131-20 )

Our M18™ ROCKET™ Dual Power Tower Light provides 25% More Light and All Day Operation on the job site with 2500 lumens of TRUEVIEW™ High Definition Output. The LED light tower has Dual Power capability and can be powered by our M18™ batteries or by an extension cord. The tower light head can extend from 4 to 7 feet to light overhead work or minimize shadows when casting light downward. The LED light tower is capable of filling large areas with light and provides 2,500 lumens of TRUEVIEW™ High Definition Output in high mode, 1,100 in medium, and 700 in low. It can run for up to 13 hours with our M18™ REDLITHIUM™ XC 5.0 Battery Pack. MILWAUKEE® TRUEVIEW™ High Definition Output provides neutral white color and a high color rendering index with a reflector that produces an even beam pattern. The portable light tower has reinforced legs that are impact-resistant, and a low center of gravity provides a stable base. The LED light head is protected by an impact-resistant lens and bezel, nested in a protective shroud for secure transport and storage. The LEDs never need to be replaced and are backed by a limited lifetime warranty. The combination of these technologies offers professionals the highest quality LED lighting solutions, on or off the job site. MILWAUKEE® ROCKET™ Tower Lights are designed to deploy in seconds and built to adapt to any job site environment. The LED light towers supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace.

M18™ ROVER™ Flood Light (Tool-Only)

( 2361-20 )

Our M18™ ROVER™ Flood Light delivers up to 30% brighter light output than 250-watt halogen floodlights. The LED floodlight illuminates large workspaces with 8 high-quality LEDs that provide 1,500 lumens of TRUEVIEW™ High Definition Output. This floodlight delivers up to 10 hours of run-time on a single charge using an M18™ REDLITHIUM™ XC5.0 battery. The cordless floodlight has an innovative roll cage design and a replaceable impact-resistant lens, that stands up to the toughest working conditions. This compact floodlight features an octagonal shape so it can be positioned and used at multiple angles, and the versatile design delivers hands-free options for a variety of applications. This floodlight has a limited lifetime LED warranty, LEDs never need to be replaced. MILWAUKEE® ROVER™ Flood Lights are built to go anywhere and withstand anything.

M18™ ROVER™ Mounting Flood Light

( 2365-20 )

Our M18™ ROVER™ Mounting Flood Light is the most versatile flood light for any task, designed to work in any workspace, jobsite, and on any surface. The food light has two powerful magnets that allow you to mount the light onto almost any metal surface and a 2” spring-loaded clamp to fix the light to piping, dimensional lumber, jobsite equipment, cabinetry, and doors. These hanging features are paired with a folding and rotating light head design allowing you to direct the light to any workspace. The M18™ ROVER™ Mounting Flood Light delivers 1500 lumens of TRUEVIEW™ High Definition Output and runs up to 20 hours with an M18™ XC5.0 battery pack giving you a powerful flood spread and all day run-time. It is impact-resistant, capable of surviving a 9 ft. drop and is backed by a limited lifetime warranty, the LEDs never need to be replaced. ROVER™ Flood Lights are built to go anywhere and withstand anything.

M18™ Search Light

( 2354-20 )

Our M18™ Search Light allows you to spot farther and flood brighter, giving you versatility, performance, and durability all in one light. The MILWAUKEE® searchlight has a pivoting head that provides 1,250 lumens of TRUEVIEW™ High Definition Output and over 730 yards of beam distance to spot objects and areas at a far distance. The M18™ LED search light has four output modes: spot mode, flood mode, spot/flood mode, and strobe mode, which allow you to spot from afar or flood an area up close. The high power LED searchlight can run up to 4 hours on flood mode and spot/flood mode, 7 hours on spot mode and 5 hours on strobe mode with an M18™ REDLITHIUM™ XC 5.0 Battery Pack attached. The Milwaukee M18™ Searchlight is equipped with a low battery indicator and has an IP54 rating for superior water and dust resistance in all weather. The high-quality LEDs never need to be replaced and are back by our limited lifetime warranty.

M18™ Utility Bucket Light (Tool Only)

( 2122-20 )

Our M18™ Utility Bucket Light is the first of its kind, revolutionizing the way Power Utility Lineman execute overhead work. It offers an increased level of durability and added features that light up workspaces more effectively. The dual light head design allows a Lineman to use spot and flood modes with one light to illuminate their work areas in ways they haven’t been able to do in the past. Its extreme weather protection and high voltage durability make sure the light will work in the demanding environments lineman experience everyday. Our patented spring-loaded clamp fits all size bucket lips and allows you to move the light around the bucket effortlessly. The M18™ Utility Bucket Light can run up to 4 hours on flood mode and spot/flood mode, and up to 6 hours on spot mode with an M18™ REDLITHIUM™ HD9.0 Battery. The high-quality LEDs never need to be replaced and are backed by a limited lifetime warranty.

M18™/M12™ Wireless Jobsite Speaker

( 2891-20 )

The Milwaukee® M18™/M12™ Wireless Jobsite Speaker delivers the loudest and clearest sound on or off the jobsite. The premium six speaker design provides unmatched clarity of sound with booming bass, clear mids, and sharp highs. Paired with a 40W dual channel digital amplifier, the speaker produces big sound to fill any room or work environment. Nothing But Heavy Duty™ construction features impact resistant side caps and a reinforced honeycomb grill to withstand drops and abuse. The latest Bluetooth® technology ensures easy pairing with a smart phone, tablet, or other mobile device from up to 100ft away. Compatible with all M18™ and M12™ Batteries or able to run off of AC power, the M18™/M12™ Wireless Jobsite Speaker maximizes versatility, functionality, and performance to set a new standard in high-definition jobsite sound.

Workwear & Gear

FITTED HAT

( 504 )

Our Fitted Hat is constructed from a lightweight combination of cotton and polyester with an adjustable flexible band. On or off the job site, the curved bill of our fitted caps fits your needs. This hat has a clean, comfortable design with a 3-1/2" crown depth. Fitted cap sizes include S/M and L/XL available in red, black, or gray.

FLEECE LINED BEANIE

( 502 )

The Milwaukee Fleece Lined Knit Hat features a fleece band around the ears to block wind and provide extra warmth in cold conditions. Beanie style construction allows for easy use under a hard hat. Durable 98% Polyester, 2% Spandex construction resists snagging and manages moisture to help prevent sweating and overheating. Product intended for cold weather use.

Goatskin Leather Gloves

( 48-73-0012 )

Our Goatskin Leather Gloves are designed with a comfortable top grain leather and reinforced palm that lasts longer. The SMARTSWIPE™ knuckle is designed to allow you the use of touch screens without removing your gloves. Additionally, the keystone thumb provides a comfortable fit. These heavy duty leather work gloves are equipped with a pull tab for easy on and off.

HEAVY DUTY PULLOVER HOODIE

( 350 )

Our Heavy-Duty Pullover Hoodies are made from durable, breathable fabric for all-day protection to outlast the job. Built with a tear- and abrasion-resistant 75/25 cotton/poly blend, these pullover hoodies allow you to work hard without compromising on comfort. Long days and tough conditions aren’t the exceptions they’re the norm, so we’ve created comfortable, durable work hoodies that survive every job site. A 450 GSM fabric weight delivers wind resistance, and comfortable fit rib-knit cuffs and waists make these work hoodies great for the most demanding conditions. MILWAUKEE® continues to deliver solutions across the jobsite. Our heavy duty workwear lives up to those same standards and will outlast any job. Choose from a wide variety of colors, including red, black, gray, blue, and hi-vis available in sizes small to 3X.

Leather Performance Gloves

( Leather-Performance-Gloves )

Our Leather Performance Gloves feature a durable palm with a lightweight design. The breathable lightweight back provides all day comfort. The palm is made from a soft top grain goastkin leather for added durability. The performance gloves have a hook & loop wrist closure for a secure fit. They have SMARTSWIPE™ touchscreen compatible knuckles so users can access their devices without taking off their gloves.

M12™ Heated AXIS™ Jacket

( 203-20 )

Our M12™ Heated AXIS™ jackets are designed to protect you from the cold and weather elements on the job site. Powered by M12™ REDLITHIUM™ Battery Technology, these heated work jackets use carbon fiber heating elements to create and distribute heat to the chest, back and shoulders. A one-touch LED controller heats up the battery heated jacket to three heat settings, creating a comfortable heat for any environment or weather. This MILWAUKEE® heated jacket has a new Quick-Heat function that allows you to feel heat three times faster than our previous jackets and market competitors. Like all of our other products, our jackets are built strong to last long with new hybrid AXIS™ Ripstop Polyester providing a lightweight, compressible design that can be used as an inner layer or mid-layer jacket and protects you from wind and water resistance to survive the elements. The heated coats are available in black and olive green options with sizes ranging from small to 3XL.

M12™ Heated TOUGHSHELL™ Jacket

( 202-20 )

Our heated TOUGHSHELL™ jacket is powered by our powerful M12™ REDLITHIUM™ batteries. Each heated jacket uses carbon fiber heating elements to create and distribute heat to your chest, back and front hand pockets. A one-touch LED controller heats up the battery heated jacket to three heat settings, creating a comfortable heat for any environment or weather. This MILWAUKEE® heated jacket has a new Quick-Heat function that allows you to feel heat three times faster than our previous jackets and market competitors. Like all of our other products, our jackets are built strong to last long with TOUGHSHELL™ stretch polyester delivering five times longer jacket life than our previous Softshell heated jackets. The durable material also provides wind and water resistance to survive the elements whether you are on the worksite or enjoying the outdoors. The heated coats are available in black, red and gray options with sizes ranging from small to 3XL.

WORKSKIN™ MID-WEIGHT COLD WEATHER BALACLAVA

( 421 )

Milwaukee® expands the WORKSKIN™ Cold Weather lineup by introducing a new Balaclava. This product handles the demands of hard work in cold conditions. Fast wicking materials move moisture away from the body’s high-sweat areas to avoid dampness, cold, and freezing. Durable, long-lasting fabric provide more insulation while resisting pilling and fighting odor, extending product life. Optimized to be used with hardhats, this WORKSKIN™ product manages moisture and body temperature helping users work dry and stay warm.

WORKSKIN™ MID-WEIGHT COLD WEATHER HARDHAT LINER

( 422 )

Milwaukee® expands the WORKSKIN™ Cold Weather lineup by introducing a new Hardhat Liner. This product handles the demands of hard work in cold conditions. Fast wicking materials move moisture away from the body’s high-sweat areas to avoid dampness, cold, and freezing. Durable, long-lasting fabric provide more insulation while resisting pilling and fighting odor, extending product life. Optimized to be used with hardhats, this WORKSKIN™ product manages moisture and body temperature helping users work dry and stay warm.

Heavy Duty Pocket T-Shirt - Long Sleeve

( 602 )

Our Long Sleeve Heavy-Duty Pocket T-Shirts are made from durable, breathable fabric for all-day protection to outlast the job. Built with a tear- and abrasion-resistant 60/40 cotton/poly blend, these long sleeve t-shirts allow you to work hard while not compromising on comfort. Long days and tough conditions aren’t the exception they’re the norm, so we’ve created comfortable, durable t-shirts that survive every jobsite. A moisture-wicking treatment makes these t-shirts great for the most demanding conditions. MILWAUKEE® continues to deliver solutions across the jobsite. Our heavy duty workwear lives up to those same standards and will outlast any job. Choose from a wide variety of colors, including red, black, gray, green, blue, and hi-vis available in sizes small to 3X.

Milwaukee® Hooded Jacket

( 252 )

Engineered to battle the jobsite and survive the elements, Milwaukee’s Hooded Jacket is built for tradesman who can’t let cold slow them down. Focused on providing reinforcement in areas where traditional workwear fails, GridIron™ 900 Denier Ripstop Polyester Outlasts 12oz cotton duck by 3X against abrasion and tearing. Combined with large riveted and reinforced utility pockets and a tarnish resistant metal zipper, this jacket won’t quit before the day is over. FreeFlex™ Mobility Gussets across the back and a fitted hood designed to provide full range of vision make sure that the Milwaukee® Hooded Jacket won’t get in the way of the work on a cold weather job.